If you are planning to invest in a new mobile concrete mixing plant, you may feel confused by the differences in price, capacity, and configuration among different manufacturers. The following questions may be what you care about: What is the price of a mobile concrete batching plant? Is it worth investing in? Which mixing plant is more cost-effective for my project? The following content will answer these questions for you.
What are the advantages of a mobile concrete mixing plant?
1. Modular structure design
The modular design separates the batching, mixing, weighing, and control systems into modules and integrates them on the chassis frame. This makes the equipment structure more compact and makes on-site installation easier.
2. Fast installation and disassembly
The equipment is pre-assembled before leaving the factory. The electrical plugs can be connected directly. On site, usually only simple ground preparation is needed. The plant can normally start production within 1–3 days.
3. Reusable equipment
A mobile mixing plant is more flexible during construction. It can be transported to different construction sites by trailer. After the project is finished, it can quickly move to a new site, allowing the equipment to be reused.
4. Small footprint
The equipment structure of a mobile batching plant is more compact. Its occupied area is usually smaller than that of a stationary mixing plant. It is suitable for projects with limited construction space.
Factors affecting the price of a mobile concrete mixing plant
The equipment price is usually adjusted according to demand because different projects require different configurations. In general, the price of a mobile concrete mixing plant mainly depends on the following three factors:
1. Production Capacity
Production capacity is the most important factor. The higher the capacity, the higher the equipment configuration and cost. A larger capacity means a larger mixing host, a more complex aggregate batching system, and larger aggregate bins, cement silos, and conveying systems.
2. Automation Level
A PLC fully automatic control system can achieve automatic batching and automatic weighing. It can also record production data, manage reports, and provide remote monitoring and fault diagnosis. These functions will increase the equipment purchase cost. If the customer has a limited budget, semi-automatic equipment can also be chosen.
3. Customization Requirements
Many mobile mixing plants are customized according to project needs. Taking AGICO as an example, we can provide customization options such as the number and capacity of cement silos, the number and storage capacity of aggregate bins, environmental dust-removal systems, automatic water or admixture systems, and mobile chassis structure design. The higher the level of customization, the more expensive the equipment will be. The total cost will increase, but the equipment will better match the project requirements.
Latest Mobile Concrete Mixing Plants Prices
| Model | Type | Rated Capacity (m³/h) | Price Range (USD) | Suitable Projects |
| AG‑YHZS25 | Small | 25 | $25,000 – $40,000 | Small-scale projects, short construction periods, temporary or remote sites |
| AG‑YHZS35 | 35 | $30,000 – $50,000 | ||
| AG‑YHZS50 | 50 | $35,000 – $60,000 | ||
| AG‑YHZS60 | Medium | 60 | $40,000 – $60,000 | Municipal roads, bridges, large residential buildings, highway projects |
| AG‑YHZS75 | 75 | $40,000 – $70,000 | ||
| AG‑YHZS90 | 90 | $40,000 – $80,000 | ||
| AG‑YHZS120 | Large | 120 | $70,000 – $130,000 | Large infrastructure, airports, high-rise buildings |
| AG‑YHZS180 | 180 | $120,000 – $250,000 |
Note: The above prices are for reference only. Actual prices should be determined based on the specific project.
Is a mobile concrete mixing plant cheaper than a stationary concrete mixing plant?
Not necessarily. The investment costs of the two types of mixing plants can be simply summarized as follows:
Total cost of a mobile mixing plant = equipment cost + transportation and installation cost + operating cost
Total cost of a stationary mixing plant = equipment cost + civil foundation cost + installation and commissioning cost + site construction cost + operating cost
In general, because the mobile mixing plant has a highly integrated structure and simple installation, it has lower requirements for the site foundation. Therefore, the initial investment cost is usually lower. The equipment is installed on a mobile chassis and can be moved quickly between sites. This also saves a lot of transportation costs. It has clear economic advantages in short-term projects or projects that frequently change construction locations.
However, the final decision should still depend on the project type and production capacity requirements. For example, in mass-production factories or large projects, a stationary concrete mixing plant may offer long-term cost advantages.
How to choose a mobile concrete mixing plant suitable for your project?
1. Choose the appropriate capacity according to the project scale
It is usually recommended to choose equipment with a capacity slightly higher than the actual demand (about 10%–20% extra capacity). This helps avoid future capacity loss and insufficient production capacity.
2. Choose the equipment type according to the construction environment
The following factors should be considered:
- Whether frequent relocation is required
- Construction site size
- Whether a stable power supply is available
- Whether the site is in a remote area
| Construction Condition | Recommended Configuration |
|---|---|
| Remote areas or places with unstable electricity | Diesel-powered equipment |
| Urban construction sites or industrial parks | Electric equipment |
| Sites that need to move frequently | Mobile concrete batching plant |
| Long-term fixed projects | Stationary concrete batching plant |
3. Choose a reliable equipment manufacturer
You can learn about the manufacturer’s customer cases, project photos, on-site videos, and overseas project cases to judge the actual operation of its equipment and its international project experience.
4. Compare the total cost, not only the equipment price
- Transportation cost: sea freight or land transportation cost
- Installation cost: on-site installation and commissioning
- Maintenance cost: replacement and repair of wearing parts
- Energy cost: electricity or fuel consumption
5. After-sales service and technical support
A reliable manufacturer should provide complete service and support, including a full equipment warranty policy, stable spare parts supply, installation and commissioning, operation training, remote technical support, or on-site service.
Advantages of AGICO compared with other manufacturers
| Item | AGICO | Typical Manufacturer Equipment | AGICO Advantages |
|---|---|---|---|
| Main Mixing Unit | Twin-shaft forced mixer with wear-resistant liners and high-strength blades | Simple structural design | Optimized mixing structure improves concrete uniformity and equipment durability |
| Weighing & Measuring System | High-precision multi-sensor weighing system, accuracy ±1–2% | Larger errors and lower measurement accuracy | Higher batching accuracy and more stable concrete quality |
| Steel Structure | High-strength thick steel plate structure | Standard steel frame structure | More durable equipment with stronger seismic resistance |
| Electrical Control System | PLC automatic control system with touch-screen operation | Basic electrical control | More intuitive interface and supports multiple automation functions |
| Production Efficiency | Short mixing cycle, actual output usually reaches 80%–85% of theoretical capacity | Large production loss in actual operation | More stable continuous production capacity |
| Automation Level | Automatic batching, automatic weighing, and production data management | Highly dependent on manual operation | Only one operator needed, improving efficiency |
| Equipment Durability | High-strength steel structure with anti-corrosion coating | Standard industrial anti-corrosion treatment | Better suited for harsh construction environments |
| After-Sales Service | Remote technical support, installation & commissioning, spare parts supply | Incomplete after-sales service system | Ensures long-term stable equipment operation |
